House we are building Prasat near Surin

alanthebuilder

Administrator
House we are building Prasat near Surin
 

Attachments

  • P1080125.JPG
    P1080125.JPG
    170 KB · Views: 40
  • P1080126.JPG
    P1080126.JPG
    166.5 KB · Views: 39
  • P1080127.JPG
    P1080127.JPG
    166.5 KB · Views: 39
  • P1080128.JPG
    P1080128.JPG
    167 KB · Views: 40
  • P1080129.JPG
    P1080129.JPG
    167.5 KB · Views: 44
  • P1080130.JPG
    P1080130.JPG
    163.5 KB · Views: 45
  • P1080132.JPG
    P1080132.JPG
    158.5 KB · Views: 43
  • P1080131.JPG
    P1080131.JPG
    159 KB · Views: 45
  • P1080133.JPG
    P1080133.JPG
    157 KB · Views: 42
  • P1080134.JPG
    P1080134.JPG
    160 KB · Views: 42

alanthebuilder

Administrator
p
 

Attachments

  • P1080117.JPG
    P1080117.JPG
    160 KB · Views: 45
  • P1080118.JPG
    P1080118.JPG
    173.5 KB · Views: 46
  • P1080119.JPG
    P1080119.JPG
    159.5 KB · Views: 50
  • P1080120.JPG
    P1080120.JPG
    174 KB · Views: 46
  • P1080121.JPG
    P1080121.JPG
    166 KB · Views: 46
  • P1080122.JPG
    P1080122.JPG
    174.5 KB · Views: 43
  • P1080123.JPG
    P1080123.JPG
    172.5 KB · Views: 43
  • P1080124.JPG
    P1080124.JPG
    159 KB · Views: 43
  • P1080125.JPG
    P1080125.JPG
    170 KB · Views: 44
  • P1080126.JPG
    P1080126.JPG
    166.5 KB · Views: 41

alanthebuilder

Administrator
p
 

Attachments

  • P1080173.JPG
    P1080173.JPG
    170 KB · Views: 41
  • P1080174.JPG
    P1080174.JPG
    173.5 KB · Views: 45
  • P1080175.JPG
    P1080175.JPG
    177.5 KB · Views: 45
  • P1080176.JPG
    P1080176.JPG
    177.5 KB · Views: 44

alanthebuilder

Administrator
Ring beam concrete pored .
We had to do in 2 sections due to the land size restrictions.


Sent from my SM-J700F using Tapatalk
 

alanthebuilder

Administrator
Ring beam completed pre cast floor beams come today 50mm thick , then we will pore 9 cube of concrete 240 strength over this with 200mm square section rebar


Sent from my SM-J700F using Tapatalk
 
Last edited:

Yorky

Fullritis Member
What is 240 strength concrete?

I've been out of the game for a long time...

[Edit: I found this on Thaivisa: "when I asked CPAC in KPG, they were not able to offer me a price in CBM, they said they calculate only CBF.

You win this weeks prize for incomprehensible abbreviations - well done"]
 
Last edited:

mahdam

Surin Dinosaur
Like this.

I think I'd already got there. Some unusual Thai strength measurement. Equates to around 24 N/mm2 in proper language I believe.

Now to determine what "200mm square section rebar" is? Any ideas?

[With your recent experience of concrete construction]

Like this.

steel-concrete-reinforcing-wire-closeup-rebar-mesh-construction-building-industry-69586451.jpg reinforcing-steel-mesh-close-up-image-construction-material-69693755.jpg rebar-grids-14436056.jpg
 

nomad97

Tyrannosaurus Rex
Staff member
Mahdam beat me to it Yorky. I was eating my fish supper. I could add the 200mm refers to the size of the square, should you still be in doubt.
 

Yorky

Fullritis Member
I had also figured that one out (I think) by going to the specification for the floor slab in my house. It's 150mm thick (but without precast slabs under) with 12 mm mesh reinforcement at 200mm centres.
 

Yorky

Fullritis Member
We used to refer to it as "reinforcing fabric" and the squares were 8 inch when I last used it.

Yes, we used the phrase "reinforcing mesh" but things change. The 12mm bar mesh at 200mm centres was used for the floor slab and flat roof in my house. The drive is reinforced with 6mm bar mesh at 150mm centres.

This is the bar for the flat roof slab (obviously not welded mesh sheet):

carportroof.jpg
 

alanthebuilder

Administrator
Yes, we used the phrase "reinforcing mesh" but things change. The 12mm bar mesh at 200mm centres was used for the floor slab and flat roof in my house. The drive is reinforced with 6mm bar mesh at 150mm centres.

This is the bar for the flat roof slab (obviously not welded mesh sheet):

View attachment 15675
This is more or less the same .


Sent from my SM-J700F using Tapatalk
 
Top